||Number of conductors
||Nominal conductors cross-section, mm²|
||0.5 – 6.0|
||2, 3, 4, 5
||0.5 – 10|
Electric resistance of conductors to DC calculated for 1 km at 20 °C complies with GOST 22483.
Wires endure AC 2.0 kV 50 Hz test during 5 minutes.
Wires and cores with conductor cross-section area 4 mm² and above must resist to repetitive bends through a system of rollers under current loading and endure at least 30000 bend cycles.
Nominal diameter of rollers and nominal tensile force:
||Nominal conductors cross-section, mm²
||Nominal tensile force, H
||Nominal diameter of rollers, mm
||for any cross – sections
||0.5 – 1.0
|1.5 – 2.5
Wires and cores with conductor cross-section area 6 mm² and above must resist repetitive π/2 radian bends at min. 49 H tensile force.
- Nominal diameter of rollers – 200 mm.
- Number of alternating bending - min. 9000.
Wires and cores are flame retardant with a single laying.
Protractedly permissible temperature for the conductors heating: min. 70 °C.
Manufactured wire length: min. 100 m. Wires of variable lengths can be delivered upon request.
Guarantee period: 2 years from the commissioning date.
The manufacturer can ensure compliance of cable quality with requirements of current technical specification, provided all terms of transportation, storage, installation and use have been observed.
Service life: min. 10 years.
All products are certified.